| MACHINE | MAKE | TYPE | SPECIAL FEATURE |
| Blowroom | RIETER | Pluck equal quantity of fibres ensures homogenous mixing & proper cleaning. | |
| 3 on -line three dimensional cameras to make it contamination free (80% efficiency). | |||
| An efficient cleaning and dedusting machine removes loose trash, fibre fragments and dust. | |||
| One roller concept with minimal fibre damage and retention of good fibres but intensive cleaning. | |||
| Three point Blending system to ensure consistent and homogenous mixing. | |||
| Card | RIETER | C 51 |
Latest
card equipped with Integrated Grinding System,
maintains card wire new through automatic grinding at
predetermined regular interval, contributes significantly
for minimum level of neps and trash in sliver. |
| Unilap | RIETER | E 32 |
World-wide,
unique fully automatic combing process determine better
I.P.I values, 50% less neps and trash in sliver. |
| Comber | RIETER | E 62 | |
| Draw Frame | RIETER | D 30 |
Digital
autolevelling system, highly dynamic servo drive ensuring
minimum count variation in the final yarn. |
| Speed Frame | LMW | LF 1400 A |
3 Roller
drafting system, hexagonal top arm, positively driven
top & bottom cleaning device suction to ensure optimal
drafting of fibres and deliver high quality rove. |
| Ring Frame | LMW | LR 6/S |
Tailor-made
spinning geometry, automatic centralized pressure regulation,
guarantees a very good quality yarn with a very low rate
of end breaks. |
| Autoconer | MURATA | 7 V |
Latest
model equipped with Uster Quantum Clearers with siro
Channel to ensure
100% contamination and defect free yarn in final
package. |
| XORELLA |
Give
high efficiency in knitting and weaving as yarn is conditioned
with cold saturated steam conditioning system with unsurpassed
performance. |
||
| LUWA | Humidification |
Suitable
atmospheric condition maintained through installation
of state of the art humidification plant by LUWA (Switzerland). |
|
| Card | LMV | LC300 V3 |
Cylinder under casing with best aerodynamics together with suction system enhance the quality and cleaning schedules. effective combination of carding zone, flat zone & stationary flat system contributes for higher NEP removal efficiency.
|
| Autoconer | SCHLAFOHRST | 338 |
Quantum
-2 yarn clearer with foreighn matter detection, on line
monitoring of ipi, cvm, etc of 100% production produces
best quality yarn with higher speed. |
| Comber | LMV | LK 54 |
New
generation comber with the state of the art technological
fetchers, production up to 1.3 ton/day, light weight
nipper modulate. lk 54 though adapt system, better control
of fibers ,3 over 5 drafting system, auto piecing
arrangement. Comber lk 54 is what you need for high
performance and top quality. |
| T.F.O. | VOKAMANN | VTS – 09 - 0F |
With wide
twist range, single belt drive, unifom package density
,timer belt drive system, pre take up roll reduces the
ballon tention & determines the density of take up package
according to wrap angle around the take up roll. |
| LAP Former | LMW | LH 10 |
Doubling
up to 28, drafting system 4 over 4, spring loaded top
roll. Speed upto 120 m/min. |
| Cheese Winding |
PEASS INDUSTRIAL ENGINEERS LTD. (P.S. METLER) |
FMK |
This
machine is equipped with overhead blower, twin disc type
tensioner, electromagnetic brake shovel, stop motion with
built in contact switch to prevent single. Patented twin wire yarn guide to avoid split yarn and to compensate tension difference of the individual ends. Effective electronic anti-ribbon device, double arm spindless cradle with inter-changeable package adopters running on double ball bearing. |
| Draw Frame | LMW | LRSB 851(DIGITAL) |
This
model is equipped with electronic levelling system and
three over three drafting system with pressure bar as well
with cleaning and suction system. Delivery speed max.
Mechanically possible: 500 to 800 mpm. |
| Speed Frame | LMV | LF 1400A |
This
machine is equipped with top and bottom positive clearers,
which provide high quality of roving. |
| Ring Frame | LMW | LR 6/s |
Ring
frame department is equipped with latest technological
machinery from LMV. 1) 3 over 3 dboule apran drafting system. 2) Spindle wharve dia 18.5mm to achieve spindle speed up to 22000. 3) Drafting p31 & cradle type r2p36 which is more suitable for f cotton . 4) PLC control system which controls spindle speed & twist variation. 5) Delay drafting system to avoid start up breakage. 6) Dual drive system for initial torque to bottom roll, that ensures nil peak effect. 7) Very easy to switch over from z twist to s twist by simple setting of limit switches. 8) Modified suction tube to provide better suction pressure at gear end also. 9) All machines are equipped with latest over head traveling clearer |
 |
 |
 |
|
Copyright © I.C. Textiles Limited, All Rights Reserved Worldwide |
||